Nature Aquascapes CO2 Diffuser
- Super fine CO2 bubbles less than 0.1mm diameter and highest diffusion rate. CO2 is capable of 100% dissolution in the aquarium water.
- High quality suction cups with holder included. Standard 6mm CO2 tubing.
- Designed to be installed outside of the aquarium, inline within the outflow tubing of your canister filter, either below the aquarium or mounted to the aquarium glass.
- Made by Intense, a well known brand for reliable, most efficient and built to last CO2 products.
- It requires a minimum of 30 psi working pressure.
- Must use CO2 pressure rated tubing only, not for use with silicone or other brand tubing. Tubing must be acid resistant. Compatible with all tubing sold by Nature Aquascapes.
- Handle diffuser carefully, do not touch ceramic. Install and remove tubing carefully.
- Do not use with bubble counter fluid or other bubble counter oils. Fill bubble counter with water only to avoid contamination of diffuser.
- Clean diffuser every 3-6 months with mixture of 3 parts water to 1 part bleach. Never rub or touch ceramic.
- It is recommended to keep 2 diffusers and rotate between cleanings.
- If the diffuser and tubing get filled with water, remove from your aquarium and allow it to dry completely before trying again.
Shipping, Warranty & Returns:
Atomic diffusers are not warranted against improper use or handling. Please read all important instructions listed above prior to purchase and prior to use.
What else do you need to get to supply CO2 to your aquarium?
- CO2 Tubing
- CO2 Check valves
- CO2 Bubble Counters
- CO2 Drop Checkers
- CO2 Regulators